Flowmaster's line of installation accessories are designed for the professional installer. These accessories are designed to work with Flowmaster mufflers in custom installations to allow for a high quality installation and years of reliable service.
| Four Piece Universal Tailpipe Kit |
 | Designed for use on 90% of all trucks, vans and SUVs. Incorporates 12 feet of aluminized mandrel bent tubing with deep slip fit connections. Aligns for left, right or rear exit style routing |
| Universal Scavenger Pipe Kits |
 | Our Universal Scavenger Pipe Kits can produce significant torque improvement. It's patented D-port™ technology functions exceptionally well on modified GM, Ford, and Mopar "Muscle Car" applications while maintaining the classic Flowmaster sound. |
| Turbo Diesel Down Pipe Kit |
 | Designed for use with Ford F-Series and Chevrolet diesel trucks. Increases air folow 25-percent, easy installation wiht two pipes. Kit inclueds head shield, ball flange connector and clamps. |
| Universal Balance Pipe Kit |
 | Flowmaster offers a pre-fabricated Universal Balance Pipe Kit to ease the installation of a crossover pipe in a dual exhaust system. Kit includes T-pipe connectors, balance pipe, and clamps. |
| S-Bends |
 | A mandrel bent, S-shape pipe, developed to simplify the routing and fabrication of exhaust pipes from headers to muffler. Deep slip fit on single end of pipe. |
| Mandrel Bends |
 | Mandrel Bends |
| Universal Intermediate Pipe Kit |
 | Kit includes a combination of S-bend pipes in pairs of 4", 6" and 8" offsets to allow the skilled DIY to fabricate the intermediate pipes of a dual exhaust system. |
| H-Pipe Ends |
 | Developed to easily fabricate an H-pipe in a dual exhaust style system. These ends are "fished mouthed" to fit tightly against the side pipes and slip-fitted to easily create the cross-over or "H-pipe." |
| Header Collector Ball Flange Kit |
 | This header collector kit takes the place of messy three bolt flange type connections and allows for a leak free and gasket free ball flange type connection. |
| Venturi Reducer Cones |
 | Form a smooth transition from one pipe diameter size to another. 8" in length. |
| Heat Shields |
 | Formed aluminum heat shield designed to mount on muffler for added protection in reducing heat radiated from mufflers and reducing interior noise. Attaches easily with included straps. |
| Tailpipe Heat Shield |
 | Pre-bent aluminum heat shield designed to reduce heat radiated from tailpipes which are routed close to gas tanks or flooring on RV or van conversion type vehicles. Individual heat shields include clamps. |
| Universal Inline Resonator |
 | Tuned resonator designed to be used in conjunction with Flowmaster mufflers for improved sound reduction. Helps eliminate interior resonance. Utilizes a 3.00" offset inlet/3.00" offset outlet design, measuring 4" thick x 8" wide x 12" case length. |
| Brushed Stainless Turn-Down Angle Cut Exhaust Tip |
 | This stainless tip is available to accent an exhaust system by offering a slight turndown design with an angle cut exit. |
| Brushed Stainless Rear Side Exit |
 | Stainless tip available to accent an exhaust system routed for a rear side exit by offering a polished angle cut designed exit. |
| Brushed Stainless Angle Cut Rear Exit Exhaust Tips |
 | Stainless tip that is available to accent an exhaust system routed for a rear bumper exit by offering a polished angle cut designed exit. |
| Polished Stainless DTM-Style Turn-Up Angle Cut Tip |
 | This polished stainless tip is available to accent a rear exit exhaust system by offering a European appearance with a slight turn-up design offering a 3.00" angle cut exit. |
| Polished Stainless C-5 Corvette Tips |
 | This exhaust tip is the same polished stainless design utilized on the 1997-2001 C-5 mufflers offered by Flowmaster. Sold as matched pair (2 pieces equal one matched tip) |
| Stainless Steel Rolled Edge Exhaust Tip |
 | Single wall, angle cut rolled edge exhaust tip, Offered in 3.00" - 5.00" exit diameter and designed to fit 2.00" - 4.00" pipe. (Sold Individually) Comes finished with embossed Flowmaster logo. |
| Stainless Steel Rolled Edge Exhaust Tip |
 | Stainless exhaust tip that is designed with a double-wall, rolled edge offering a 3.50" and 4.00" diameter exits. Designed to fit onto 2.50" pipe. Comes finished with embossed Flowmaster logo. |
| Stainless Steel Rolled Edge Exhaust Tip |
 | Stainless exhaust tip that is designed with a rolled edge offering a 3.00" diameter exit. Designed to fit onto 2.50" pipe. (Sold Individually) Comes finished with embossed Flowmaster logo. |
| Stainless Angle Cut Exhaust Tip |
 | Exhaust tip with non-rolled angle cut end. Offered in 3.00" exit diameter and designed to fit 2.50" pipe. (Sold Individually) Comes finished with embossed Flowmaster logo. |
| Stainless Steel Exhaust Tip |
 | This Stainless tip is a 12 inch long tip designed to slip fit over a 3.00" pipe to offer a 3.50" outlet diameter tip. Style is a highly polished round tip iwth a rolled edge and embossed Flowmaster logo. |
Quick Muffler offers written part and labor garantee and quick while you wait services. Call us today for your next project in custom performance exhaust system upgrade in your car.
